Industrial Scrap Shear 630 Ton For Steel Mill Furnace Feeding PLC Automatic Remote Control

1. Product Description

1.1 Product Positioning

The Q43W-6300A industrial scrap shear is designed for steel mills and scrap processing centers that need to prepare oversized ferrous scrap for furnace feeding. It is used to reduce long and bulky steel sections into practical lengths that meet downstream melting or production requirements.

This machine is suitable for steelmaking environments where stable output, consistent scrap sizing, and reliable hydraulic cutting performance are important for daily operation.

1.2 Technical Specifications

1.3 Typical Applications

1. Steel Mill Furnace Feeding Preparation
Steel mills often require scrap to be cut to suitable lengths before charging. Oversized materials disrupt feeding and handling. The machine prepares scrap into more practical sizes for furnace use.

2. Steelmaking Scrap Standardization
When incoming scrap varies greatly in size, steelmaking processes become less efficient. The shear improves consistency in scrap size and supports smoother production flow.

3. Scrap Processing Center Operations
Processing centers that supply steel mills need to standardize scrap before shipment. The machine supports efficient preparation of ferrous materials.

4. Heavy Steel Offcut Reduction
Production leftovers and heavy offcuts are difficult to reuse or transport without cutting. The shear reduces them to more convenient dimensions.

5. Plate And Profile Pre-Treatment
Thick plate and profile scrap can be cut before entering downstream handling or melting systems, reducing operational bottlenecks.

1.4 Core Features Explanation

1. Designed For Furnace Feeding Preparation
The output opening and cutting configuration make the machine suitable for preparing scrap to a more controlled size range for downstream use.

2. PLC Automatic Plus Remote Control
The control system helps improve process stability and reduces dependence on manual operation during repetitive cutting work.

3. Strong Shearing Capability
The 2890 × 2 kN cutting force supports processing of heavy steel materials commonly found in furnace feeding applications.

4. Stable Hydraulic Performance
22.0 MPa working pressure and air cooling support steady operation under industrial duty conditions.

5. Practical Capacity For Steel Processing
8–10 t/h output fits steel mill support operations and scrap preparation centers.

1.5 Data-Based Performance

1. Cutting Force Level
2890 × 2 kN ensures strong performance for heavy ferrous scrap preparation.

2. Production Output
8–10 tons per hour allows the machine to support regular furnace feeding preparation demands.

3. Cutting Frequency
3–4 times per minute provides practical continuous productivity.

4. Power Support
Three 45 kW motors give about 139 kW total installed power.

5. Material Suitability
The machine can process square steel, angle steel, round steel, I steel, steel plate, and channel steel in the specified size range.

1.6 Problem Solving Value

1. Oversized Scrap Cannot Enter Furnace Directly
Large scrap often needs pre-treatment before use in steel production.

2. Inconsistent Scrap Size Affects Workflow
Uncontrolled scrap sizes make feeding and handling less efficient.

3. Transport And Internal Transfer Difficulty
Long steel sections are harder to move inside plants and between process steps.

4. Production Delays In Scrap Preparation
Without suitable cutting equipment, scrap preparation can become a bottleneck.

5. Higher Manual Handling Burden
More manual intervention increases labor intensity and reduces efficiency.

The Q43W-6300A improves steel mill scrap preparation by reducing oversized materials into more suitable lengths, supporting smoother furnace feeding and more efficient plant operation.

2. RFQ (Request For Quotation)

1. What type of scrap do you prepare for furnace feeding?
Please describe whether you mainly process structural steel, plate scrap, profile scrap, or mixed ferrous materials.

2. What scrap size do you require after cutting?
The desired output length and section size will help us understand whether this model fits your production needs.

3. What is your target hourly processing volume?
Please share your expected throughput so we can confirm capacity suitability.

4. Will this machine be used as a standalone unit or in a larger processing system?
This helps us evaluate layout, feeding direction, and control coordination requirements.

5. What are your plant power supply and space conditions?
Please provide voltage, frequency, and available installation area so we can prepare a more accurate proposal.

3. FAQ

1. Is this machine suitable for steel mill furnace feeding preparation?
Yes. It is suitable for reducing oversized ferrous scrap before furnace charging.

2. What is the processing capacity of this industrial scrap shear?
The output is about 8–10 tons per hour, depending on material type and feeding conditions.

3. Does the machine use PLC automatic control?
Yes. It uses PLC automatic control with remote operation.

4. What is the hydraulic system pressure?
The working pressure is 22.0 MPa, with a maximum of 25.5 MPa.

5. What is the blade length of the machine?
The blade length is 1500 mm.

4. CTA

Need an industrial scrap shear for steel mill scrap preparation?

Contact Jiangsu Wanshida Hydraulic Machinery Co., Ltd. to get:

1. A machine recommendation based on your furnace feeding requirements
2. A technical solution for scrap preparation and cutting workflow
3. Main configuration details and quotation support
4. Assistance with installation, commissioning, and operation

Send your inquiry now and get a suitable solution for steel mill scrap processing.